Blue Screen of Death

 When encounter this screen Won.. it's my PC trying to boot up from my PCI-E drive.

1. Go to Startup BIOS setup

2. Select Bootup tab

3. Change the startup disk to Samsung.

Zbrush 2025.2 Brush increase or decrease hotkeys don't work. Fix!

Here is the reply from Maxon (Zbrush)

Thank you for using ZBrush!
 
There has been an oversight with the newest release where a couple of plugin files were overlooked and didn't make it into the software.  
 
I have attached the HotKeyDrawSize.zsc file and InteractiveLight.zsc file to this response.  You will want to copy them into the ZData/ZPlugs64 folder of your ZBrush installation.
 
By default that folder is located at C: > Program Files > Maxon ZBrush 2025 > ZData > ZPlugs64. 

HotkeyDrawSize

InteractiveLight

Windows 11 Timer shutdown

Right-click on the Windows logo and select "Run"

Type "shutdown -s -t <number in seconds>" and press enter key. For example, if you want to shut down your PC/laptop after 100 minutes then, type: shutdown -s -t 6000. In this case, 6000 denotes the number of seconds, therefore your machine will shut down automatically after 100 minutes.

UV transfer from one mesh to another in Maya 2024

 To transfer uv map from one mesh to another, follow steps below.

1. In Maya, select source mesh and shift select receiving mesh.

2. When both meshes have been selected, choose "Mesh" in the menu and select "Transfer Attribute" box.

3. See image for settings.  "Vertex position" should be "on" if you want the mesh to be shrink wrapped to source mesh.

4. Click "Transfer" then delete history by "Edit > Delete All by Type > History".  Done.

Substance Painter Smart Material (Stylized Visual)

To achieve a stylized look on the textures in Substance Painer, follow this basic settings.

and this is the what overall layers looks like..

 

Start by adding "Fill Layer" (Base) and select "Color" and other channels if needed

The base has a "normal" layer setting

This is what the channels looks like on the Base layer

Edge Highlight needs to be set to "Linear Dodge (add)" on the layer setting.

Add Mask Editor generator, and make parameter adjustments.

Gradient should have "Overlay" layer setting

Add a mask and add Mask Editor generator

Fill Gradient should also have "Overlay"layer settings

Add a mask and add Mask Builder - Legacy generator